I have recently come across the software the Wouxun factory uses to set the band limits on the KG-UV950P.
While the software is in Chinese, it’s functional, and allows setting of all band limits on the radio.
Here’s an English version of the interface:
Note when using this software:
This possibly has the potential to damage the radio, if you transmit on a frequency it’s not designed for. Not to mention the legal issues with transmitting on frequencies that aren’t permitted! Use at your own risk!
Hi
The kg-950 I have will not detect channels programmed ctcss/DCS frequencies when scanning in channel mode.
Scanning stops whenever there is RF signal received on the programmed channel frequency.
I want the Scanning to stop only when the programmed ctcss or DCS is detected on the programmed channel.
Is there a setting I missed or is there a mod I can use to obtain true channel mode scanning?
Thanks
George
I guess that is all Chinese cheep radio problem.
I faced the same problem on Baofengs, while it was no problem on Motorola’s.
Will this work on the 980h quad band radio
Hi Larry,
Unfortunately I have no idea, as I do not have that particular model of radio.
Will this work with the Uv9D?
Have look here at the bottom of the page:
http://www.spooktech.net/ham/wouxun/software
Hello
Hi
Where can I find the software? The link does not font. Please help . thanks
Andreas
did you find the 950 software??
I can’t find it either….
Nick
It’s been uploaded to a new site
http://frostyfruitsbrewing.com/software/
So where’s the software?? R2XPV130831.rar has disappeared No Band Unlocking
Apologies, the file has been restored
Check description and follow the video
https://www.youtube.com/watch?v=aH-oi1jqhHk
The youtube video is “private”. Any way that I can get access?
Does this software still work? And will it work for the UV-980P?
yes it does