variable – Experimental Engineering

I’ve noticed that the RF power output from the Chinese radios can be quite variable from model to model, and even from individual radios of the same model & batch.
I’ve bought an RF Power meter (GY561) to do some tests on the HTs I have at present.

All tests were performed with the radio fully charged & still on the charging base, to make sure the supply voltage remained constant at 8.4v throughout the tests.
Frequencies used were 145.500 & 433.500 for VHF & UHF respectively.
The power meter was connected with ~8″ of RG174 Coax.

High Power:

UV-5R 1 (S/N: 13U1136132):
VHF: 6.3W
UHF: 4.9W

UV-5R 2 (S/N: 13U1136114):
VHF: 6.5W
UHF: 5.2W

UV-5R 3 (S/N: 130U541416):
VHF: 7.1W
UHF: 6.3W

Low Power:

UV-5R 1 (S/N: 13U1136132):
VHF: 2W
UHF: 1.2W

UV-5R 2 (S/N: 13U1136114):
VHF: 2.3W
UHF: 1.5W

UV-5R 3 (S/N: 130U541416):
VHF: 2.7W
UHF: 2.1W

Here we have a Dremel MultiPro rotary tool, a main powered 125W 33,000RPM bit of kit.

Here the field & controller assembly is removed from the casing.

Here is the armature, which rotates at up to 33,000RPM. The brushes rise against the commutator on the left, next to the bearing, the cooling fan is on the right hand side on the power output shaft, the chuck attaches at the far right end of the shaft.

Here is the speed controller unit, inside is an SCR phase angle speed controller, to vary the speed of the motor from 10,000RPM to the full rated speed of 33,000RPM.

This is the mains filter on the input to the unit, stops stray RF from the motor being radiated down the mains cable.

Tag: variable

Baofeng UV-5R RF Power Measurements

Dremel MultiPro