Vibra Motor – Experimental Engineering

Here is a more modern phone, the Motorola V360v. Features include Dual screens, 640×480 VGA camera, full col

our TFT Main LCD, SD-Micro slot.
Here on the back the grey scale LCD can be seen, with the camera lens to the right of the Motorola logo

Here the phone is opened showing the keypad & the full colour TFT LCD display.

Here the battery is removed from the unit, showing the SIM connector. The antenna cover is still on at the bottom.

The antenna cover has been removed in this shot, the antenna is the white section at the bottom, With the loudspeaker & the external antenna connector hidden at the right.

Here is the main PCB. Parts from left are the Bluetooth module at the top, supplied by Broadcom, the SD Card socket at the bottom. Main CPU next to that is the Freescale SC29343VKP. Above right of the CPU is the Freescale SC13890P23A Charger, Power & Audio IC. Below is the SIM card socket. Under the main CPU is the Intel Flash memory IC. ICs inside the shields are the RF sections for transmit & receive.

Rear of the display unit showing the monochrome LCD. The camera module on the bottom left. Ear speaker on the far right of the unit.

Main colour TFT LCD.

Camera module removed from the LCD unit.

The vibration motor attached to one of the LCD looms.

Another phone from the mid 90s. This is the nokia 7110.

Here the slider is open showing the keypad.

Here the battery is removed, a Li-Ion unit.

The battery cell & protection circuit removed from the casing.

This is the rear of the PCB removed from the housing. Data & charging ports on the right hand side f the board.

Front of the PCB with the RF sections at the left hand side & the keypad contacts on the right.

Closeup of the RF sections of the board, big silver rectangular cans are VCO units.

Closeup of the top rear section of the PCB, with SIM cnnector, battery contacts, IR tranciever at the far left. Bottom centre is the external antenna connector.

The logic section of the board, Large chip is CPU, to right of that is the ROM storing the machine code. Other chips are unknown custom parts.

The Mic & the loudspeaker removed from it’s housing.

LCD from the front of the unit, SPI interfaced. Flex PCB also contains the power button, loudspeaker contacts & a temperature sensor.

The scroll wheel removed from the front housing.

Tiny vibration motor removed from the rear housing, alerts the user to a text or phone call.

Tag: Vibra Motor

Motorola V360v

Nokia 7110